The traditional use of the curing room of the soft bag enterprise uses the electric heating system to heat the air in the curing room continuously, so that the ink, glue and film will react chemically, and the solvent or water exceeding the standard will be discharged. This ripening method has the following disadvantages:
1) Electric heating has low energy efficiency, 1 KWh electric auxiliary work is 0.92 KW heat energy, and electric energy is converted into heat energy with loss;
(2) Electric heating makes the heating pipe fully contact with the solvent, and the safety risk is low. Once the risk loss is incalculable;
(3) Temperature control error is large and difficult to control;
(4) It has high requirements on the voltage load of the factory and is easy to generate instantaneous high-voltage current.
For the use scenario of the curing room of the soft bag enterprise, Jinchuang Environment Company specially develops and produces the curing room dryer, which can save energy in the drying of the post-press curing process. Compared with the traditional electric heating curing method, Jinchuang curing room dryer has the following advantages:
(1) The compressor is used to absorb free heat from the air for drying, and the energy saving rate is more than 50% compared with the traditional heating system;
(2) With free air conditioning, it can provide cooling for the workshop and improve the workshop environment;
(3) Integral design of the unit, simple installation;
(4) Intelligent control, accurate temperature control in the curing room;
(5) High static pressure centrifugal fan design, low noise.
Jinchuang ripening room energy-saving unit solution:
